How to Fix a Leaking Tap or Dripping Geyser Valve
Every good job starts with a plan on paper. Measure the space, list what you need and check your budget before you come in. A short list saves you many trips to the shop. Our staff at Selfbou can help you work out quantities of paint, timber or pipe fittings so you buy enough the first time.
Once you have your materials, set up a clear workspace with good light and a sturdy bench. Keep a tape measure, pencil and spirit level close by. Take your time with each step, and test any cuts on an offcut before the real piece. Most mistakes come from rushing, not from missing skill.
Planning ahead
Start with the basics: a hammer, a tape measure, a cordless drill and a good set of screwdrivers. These handle most jobs around the house. Add a spirit level and a handsaw, and you can hang shelves, fix doors and build simple frames.
When your projects grow, look at power tools such as a jigsaw or an orbital sander. Buy the best you can afford, because cheap tools wear out fast. Always wear safety glasses and gloves, and keep your work area tidy so nothing gets in your way.
Planning ahead
Paint lasts longer when the surface is clean, dry and sanded smooth. Fill any cracks, let the filler cure, then apply a primer before the topcoat. Two thin coats always look better than one thick coat. Check the weather forecast so rain does not spoil fresh paint, especially in the late summer afternoons.
A small leak can waste a lot of water over a month. Close the isolating valve, then unscrew the tap and replace the worn washer or cartridge. Wrap thread tape around any threaded joint before you put it back together. Keep a spare set of washers in your toolbox, because they cost very little and fix most drips.
55 Grobler Street
Polokwane,
0699
